|
|
Submersible Water Pond Pumps
Submersible pumps are placed directly in the pond.They are free of distracting noise and can be used to drain your pond water pump when necessary. These pumps do have a disadvantage. The pump seal can rupture, sending oil coolant into the water. This can prevent surface gas exchanges, thereby endangering your fish. This happened to my pond only weeks after the pump was turned on. I would recommend the new magnetic-drive pump, which avoids the use of coolants. They are more expensive to buy but are far less expensive to operate.
I have been asked many times if you can use a swimming pool unit. This is very impractical for most people because they are very difficult to maintain. A pond solar water pump has far more organic particulate matter (small separate particles) than a chemically maintained swimming pool. Sand is a fine medium that quickly clogs with debris. "Channeling," in which water runs in limited paths, avoiding most of the filtration media, often occurs so that daily or frequent backwashing is required. Some pond keepers have adapted these units by using larder media, such as a proportion of gravel Gravel is heavy and difficult to clean.
Calculate water Volume
Rectangle Water Pond pump Length in feet x width in feet x depth in feet =cubic feet Circular pond. 3.14 (1/2 diameter in feet x 1/2 diameter in feet) x depth in feet = cubic feet. Free form shapes. Break the pond down into a series of rectangles and circles and figure the volume of each area separately, then add the volumes together. Each cubic foot contains 7.5 gallons of water, so multiply the total number of cubic feet times 7.5 to determine the total number of gallons
Pond Building Guide
Introduction
Types of Backyard Ponds
Pond Design, Size and Location
Pond Budgeting, Building and Edging
Pond Filters, Pumps and Lighting
Building Backyard Fish Ponds: It Can Be Done!
Select a Water Pond Pump
|
|
